Doors: entrance, interior, swing, sliding, selection, installation
Without which our housing is inconceivable is - without doors. Entrance and interior, iron, wood, glass, plywood and MDF, plastic and metal-plastic. They are also solid and paneled, with or without glass inserts. By the way of opening, the doors are sliding, pivoting, swinging, even in this variety you can get confused. And they also need accessories: hinges, handles, locks, linings, closers and clamps. They are also produced from different materials, they also need to be chosen wisely. Only in this way will the doors be durable, reliable, beautiful and, at the same time, functional.
Choosing a door for each of these categories is not an easy task, but simply necessary. The quality of entrance doors is the reliability of your home and its safety. And these are far from trifles. Moreover, everything is important - from the door leaf to the material of the hinges and the method of their installation. You can talk a lot about the choice of locks and their systems. And all this, combined with a competent installation, will give the required degree of protection.
Having chosen, all this needs to be assembled and installed. And this is also not easy. Assembling and installing the door frame and hanging the door leaf is a demanded service. But why pay money for something that you can do with your own hands? How to install doors, and then how to make slopes - you will find materials in this section about all this.
Sooner or later, you have to change the interior doors. The procedure is not so complicated that it is imperative to hire a specialist. If you have at least some skills in handling a saw, a level and a plumb line, you can tighten a few screws - do it yourself. When replacing, before installing the interior door, ...
There are two technologies for decorating door slopes: plastering and decorating with hard finishing materials such as laminated MDF, plastic, drywall, etc. Leveling the door slope with plaster is the most reliable way from the point of view of safety: there are no gaps and gaps left, it will be very difficult to knock out the doors. ...
The design of door slopes is an obligatory part of a major overhaul or decoration of a newly built house. Plastering can be considered a classic design today. This method, although it takes a lot of time, is the most reliable: with such a finish, no voids remain. Although it is not easy ...
After installing the door, the walls adjacent to it - the slopes - have a deplorable appearance. Perhaps the fastest way to put them in order is to trim them with laminated panels. It can be MDF or laminated chipboard (chipboard). There is not much difference. The main task is to choose a drawing ...
After installing the door between the wall and the door frame, there are often considerable gaps, and the appearance of the walls located next to the frame is far from ideal. To solve these problems, they came up with slopes on the doors. The name went on, probably due to the fact that adjacent small ...